Author Archives: admin

Building Your Own Hydraulics

Published by:

When you need to move a heavy load, or to keep something in a specific position for a long period of time, you will want a hydraulic system to help. These systems work by pumping fluid into a sealed shaft in order to push a piston out and hold it there until the fluid is released back into the holding chamber. There are many ways to use these systems, from theater to assembly lines, and a couple of ways to build your own.

The Right Parts

The first thing you will need to build your hydraulic system is a bit of planning. You will want to know what kinds of loads you are pushing, how long you need the piston to stay extended at any given time and what types of pressure you are looking for. This can help you get the right pumps, high pressure hydraulic shaft seals and other parts you need for the system.

The Right Plans

Once you initial planning phase is done, it is time to look at various building plans to see which one fits your needs the best. You can find video and blog tutorials online to get you started and then tweak the final product for your specific use.

The Right Knowledge

The more you know about hydraulic systems, the easier it will be to design and build your own. It will also be easier to maintain if you know some basics because you will be able to design the system for easier maintenance as well as know where the wear-and-tear is likely to happen.

With the right parts, plans and knowledge, you can build and maintain your own hydraulic systems for everything from manufacturing companies to cosplay props. This allows you to have the system set up to your specifications as well as know how to maintain and repair it better.

Why You Need to Consider the Electromagnetic Compatibility of Your Product

Published by:

If you’re in the business of manufacturing electronics, or products that contain electronics, you have probably heard the term “electromagnetic radiation.” But what does that mean for your product? Is that even something you have control over? The answer is yes, and there are many reasons to apply this to your chain of manufacturing.

Electromagnetic Compatibility Means Quality

Too much electromagnetic radiation is bad. The damage can be both operational and physical. Whether it’s coming from your own product or from outside sources, it can hinder the performance and accuracy of electronics. If your product is medical or sensory in nature this could even mean life or death. So why would you want to get in your own way? Include electromagnetic compatibility (EMC) early on in your design process in order to limit this phenomenon in your product; this will cover your bases for both the emission of electromagnetic energy and immunity from outside energy.

EMC Regulation Testing

To ensure that your product complies with EMC regulations, you’re going to need to have it tested. Even if you produce in a sector that doesn’t mandate this, it should be considered best practice, anyway. If you ever anticipate distributing internationally you want to make sure you come up to the highest standards. There is a multitude of options for getting EMC Regulation Test done, for both emission and immunity.

Avoid Legal Complications

If you aren’t convinced by anything else, complying with electromagnetic compatibility regulations will save you money. If you want to avoid fines and wasted product manufacturing due to recall, don’t cut corners on this important aspect of your product. Although not everybody gets caught, why take that risk? For some product types and geographic regions, this is even mandated, so make sure you know what is required of you.

Protect the Spectrum

The part of the electromagnetic spectrum that our electronics use is finite. We don’t want to crowd it with unnecessary radiation. Do you want your product to continue to work in the future? Participate in the minimal creation of electromagnetic output. Doing what’s best for everybody is also in your best interest. Important technologies like radio and microwaves depend on this!

Although it is a complicated concept, the occurrence of electromagnetic energy in our electronics and the world around us is not one to be taken lightly. Do your part by manufacturing electronics responsibly. There are plenty of resources out there to educate yourself. Don’t skip this step and your product will have a much better chance at success!

3 Tips for Building a Gas Station

Published by:

If there is one commodity that consumers cannot get enough of, gasoline certainly qualifies. With an ever-increasing amount of vehicles on the road, the need for fuel continues to rise, creating a reliable relationship of supply and demand. These prospects present an attractive opportunity to those possessing an entrepreneurial spirit, and with the right planning getting into the business of petroleum can be an ideal venture.

As you consider your options and look into the logistics of gas station construction, take a moment to consider the following three tips that can help you on your way.

1. Location Matters

This advice may seem obvious, but selecting the right location for a gas station involves more thought than you might have realized. As you familiarize yourself with the available land for sale, look for real estate that is or will be surrounded by high volumes of traffic. Areas that are positioned in common commuting routes or near a rapidly developing community are guaranteed to be visited by motorists regularly.

2. Invest Wisely

Once you have researched the land for sale and have identified the best lots on the market, compare the cost differences. Though one location may seem better than another, the sale price may be inflated and outside of your budget. Weighing the initial costs against the potential return on your investment should play a major role in the decision making process.

3. Hire the Best

Building a gas station requires numerous permits, safety precautions and environmental regulations. A project requiring this level of expertise should never be left to the amateurs so choose your contractor carefully and thoroughly. Look for companies that have specialized in the fuel industry for an extensive period and have a solid performance record.

Taking the time to plan ahead and seek professional help will ensure your business enjoys a successful beginning and a promising future.

Hiring a Company to Treat Your Industrial Wastewater

Published by:

Do you own a factory that generates a large amount of wastewater? If this is the case, you will need to find a company that will be able to deal with that wastewater for you to ensure it is properly treated. There are quite a few companies that offer this type of service. However, you should not be in a rush to hire one of them. Take a look at the backgrounds of each company. This will allow you to see what all of your options are. Then you will be able to make an educated decision. Here are a few tips that will guide you when you are trying to find a company that specializes in industrial wastewater treatment.

1. How long has the company been in the wastewater treatment business?

You need to get some idea about the level of experience that the company has. It stands to reason that a company that has been around for many years must know what they are doing. Otherwise, they would not be able to stay in business for so long. Ideally, you should only hire a company that has been in the wastewater treatment industry for at least five years. This will give the peace of mind that you will be getting great service.

2. Talk to people you respect to get references.

Your next step should be to seek out a few people who have some knowledge about the various companies that work in the wastewater treatment industry. Find out what these people have to say. Where did these people get the equipment they use to treat wastewater? Have they had any problems with it so far? Would they recommend that you contact the same company for your wastewater treatment needs that they are currently using? This info can be quite useful to you.

3. What will the total cost be?

You must always factor cost into the equation when you need to have your wastewater treated. This is why you need to spend some time comparing prices. This will help you to avoid paying more than you need to.